Toshiba PSM30C-7101U User Manual - Page 170
CONNECT, NO CARRIER, AT Commands, S-registers
View all Toshiba PSM30C-7101U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
User's Manual A CONNECT display is quickly replaced by NO CARRIER Check the error control setting in your communications application. You can also use the AT\N command. Refer to Appendix C, AT Commands. Character display becomes garbled during a communication In data transmission, make sure the parity bit and stop bit settings correspond with those of the remote computer. Check the flow control and communication protocol. You cannot receive an incoming call Check the rings before auto answer setting in your communications application. You can also use the ATS0 command. Refer to Appendix D, S-registers. If problems persist, contact your dealer. LAN Problem Cannot access LAN Procedure Check for a firm cable connection between the LAN jack and the LAN HUB. Wake-up on LAN does not work Make sure the universal AC adaptor is connected. The Wake-up on LAN function consumes power even when the system is off. If problems persist, consult your LAN administrator. TROUBLESHOOTING 9-22