Toshiba PSM30C-7101U User Manual - Page 211

APPENDIX G Appendix G *1 Factory-set default channels *2 Refer to the sheet Approved Countries/Regions for use for the countries/regions that in which these channels can be used. When installing Wireless LAN Cards, the channel configuration is managed as follows: y For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN Card will automatically start operation at the channel identified by the Wireless LAN Access Point, When roaming between different access points the station can dynamically switch to another channel if required. y For Wireless LAN Cards installed in Wireless clients that operating in a peerto-peer mode, the card will use the default channel 10. y In a Wireless LAN Access Point, the Wireless LAN card will use the factoryset default channel (printed in bold), unless the LAN Administrator selected a different channel when configuring the Wireless LAN Access Point device. Wireless IEEE 802.11 Channels Sets (Revision A) Channel ID Frequency Range 5150-5850 MHz Note 36 5180 40 5200 44 5220 48 5240 52 5260 56 5280 60 5300 64 5320 149 5745 153 5765 157 5785 161 5805 G-3