Toshiba Qosmio F25 User Guide - Page 105

105 Learning the Basics Powering down the computer ❖ When I close the lid Set this option to Hibernate so that the computer will go into Hibernation mode when you close the display panel. 7 Click Apply. 8 Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Once the computer is configured, place the computer into Hibernation mode by either pressing the power button or closing the display panel, depending on the hibernation options selected. Starting again from Hibernation mode Use these instructions to restart the computer when you enter Standby mode by closing the display panel: ❖ AC power. Open the display panel. ❖ Battery power. Open the display panel and press the power button until the on-off light changes to green and the power button glows blue. The computer returns to the screen you were previously using. Using Standby Mode The Standby command puts the computer into a powersaving mode. Standby stores the current state of the computer in memory so that, when you power on the computer, you can continue working from where you left off. Factors to consider when choosing Standby: ❖ While in Standby mode, the computer uses some battery power. If your computer is left in Standby mode for an extended period, your computer could lose data. ❖ Restarting from Standby uses less time and battery power than restarting from Turn Off or Hibernation mode.