Toshiba Qosmio X300 PQX32C-033019 Users Manual Canada; English - Page 113
Computer Handling, Disconnecting the LAN cable, Cleaning the computer, Using the cleaning cloth
View all Toshiba Qosmio X300 PQX32C-033019 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Operating Basics Disconnecting the LAN cable To disconnect the LAN cable, follow the steps as detailed below: Make sure the LAN Active indicator (yellow LED) is out before you disconnect the computer from the LAN. 1. Pinch the lever on the connector in the computer's LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub or router in the same manner. Check with your LAN administrator and hardware or software vendor before disconnecting from the hub. Computer Handling This section explains computer handling and maintenance. Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and dirt, and use care with all liquids around it. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely - in these circumstance you should get the computer inspected by an authorized service provider in order to assess the scope of any damage. ■ Clean the plastics of the computer using a slightly water dampened cloth. ■ You can clean the display screen by spraying a small amount of glass cleaner onto a soft, clean cloth and then wiping the screen gently with the cloth. Using the cleaning cloth Some models include 1 cleaning cloth. The cleaning cloth can be used to wipe away dust and fingerprints from the keyboard and palm rest area of your computer. ■ When wiping the keyboard, palm rest and display panel, do so gently without using excessive pressure. ■ Do not use the cleaning cloth when it is dirty or wet. ■ Do not use the cleaning cloth soaked with water, detergents or volatile organic solvents. It is recommended that you wash the cloth if it gets soiled using a gentle, mild detergent and rinse it well. Allow it to air dry completely before using it again on your computer. User's Manual 4-49