Toshiba Satellite Pro L450-W1543 Maintenance Manual - Page 138
Removing the HDD plate
View all Toshiba Satellite Pro L450-W1543 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 2. Remove the HDD pack by pulling on the tab attached to the pack. NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails. 3. Place the HDD pack on a flat surface such as a desk. 4. To separate the plate from the HDD, remove four M3x3 screws according to the number sequence sealed on the HDD plate. 1 M3×3*4 2 3 4 Figure 4.3 Removing the HDD plate CAUTION: Do not apply pressure to the top or bottom of the drive. Satellite L450/Pro L450/L450D/Pro L450D Maintenance Manual 4-11
Error! Style not defined.
Error! Style not defined.
4 Replacement Procedures
2.
Remove the HDD pack by pulling on the tab attached to the pack.
NOTE:
Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
3.
Place the HDD pack on a flat surface such as a desk.
4.
To separate the plate from the HDD, remove four M3x3 screws according to the number
sequence sealed on the HDD plate.
1
2
3
4
M3×3*4
Figure 4.3 Removing the HDD plate
CAUTION:
Do not apply pressure to the top or bottom of the drive.
Satellite L450/Pro L450/L450D/Pro L450D Maintenance Manual
4-11