Toshiba Satellite Pro L450-W1543 Maintenance Manual - Page 158
Error! Style not defined., Align the VGA CONN and RJ45 CONN
View all Toshiba Satellite Pro L450-W1543 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Installing the Motherboard Install the motherboard according to the following procedures. 1. Before seat the motherboard on the logic lower assembly, pull out the USB FFC to avoid being pressed. 2. Align the VGA CONN and RJ45 CONN to the holes in the logic lower assembly as shown in Figure 4.22. Figure 4.22 Align the VGA CONN and RJ45 CONN 3. Align the Audio CONN to the holes in the logic lower assembly and push the motherboard downward. Make sure the SPDIF & Audio CONN fit the holes. Figure 4.23 Align the Audio CONN 4. Put the DC_IN CONN in the lower DC_IN trough and route the cable from left to right under the routing channel as shown in Figure 4.24. Satellite L450/Pro L450/L450D/Pro L450D Maintenance Manual 4-31