Tripp Lite USA-19HS Owner's Manual for USA-19HS Windows v3.7S 933021 - Page 3

Software and Hardware Installation Installation Overview Installation is 3 part process where you will 1) install the Keyspan software, 2) connect your adapter, and 3) determine your adapter's COM port assignment. This last step is important because this is COM port that you will tell your serial device to use. Please follow the instructions below to complete this process Install Keyspan Software Important Notes: DISCONNECT your Keyspan adapter BEFORE install the Keyspan software. 1. Install the Keyspan Software: CDROM Installation: Windows will automatically open the Keyspan CD Browser window (Note: you can manually start the CD browser by locating and running the "Launch.exe" program on the CD-ROM). Using the onscreen menus, locate the Keyspan Installer selection and click it to start the installation process. Follow the instructions on-screen. Installation via download: Download the Keyspan driver from Keyspan's website (http://www.keyspan.com). Find and download the Keyspan USA-19HS installer. When you have downloaded the installer, run installer. WINDOWS Vista Tech Note: During and/or after the software installation, Windows may report ''Windows can't verify the publisher of this software'', click the ''Install this driver software anyway'' selection. 2. Follow the installer's onscreen instructions to finish the software installation. When the installer completes, proceed to the Step 3 (Setup Hardware). Setup and Connect the Keyspan Hardware 3. Connect one end of the USB cable to the USB port on the back of the Keyspan adapter. Connect the other end of the USB cable to the USB port on your computer. When you connect the adapter, Windows will detect your Keyspan adapter. During this time, you may see Windows messages appear and disappear showing the names of different components of the Keyspan adapter. This is normal during the the first installation of your adapter. WINDOWS Tech Note: During and/or after the hardware installation, the Windows New Hardware Wizard may ask you to install software several times. Select 'Install the software automatically'. You may also get an additional prompt regarding logo testing, click 'Continue Anyway' if it appears. Note that you may get this message several times. Continue through all the Hardware Wizards that appear until they stop appearing (you may see up to 3 Hardware Wizards). 4. When Windows has finished the installation of drivers for your adapter, proceed to the Step 5 (Determine Keyspan's COM Port Assignment). USA-19HS - User Manual Page 3 of 30