Uniden APPCAM25HD English Owner's Manual - Page 15

Mount the AppCam 25HD Base

Get Uniden APPCAM25HD PDF manuals and user guides View all Uniden APPCAM25HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

•• Avoid pointing the camera directly at any bushes, tree branches, or moving objects that might naturally move due to winds. Otherwise, the motion detection feature may record unnecessarily. You can mount the AppCam 25HD with the stand on the bottom (on a flat surface such as a table-top), on the side (on a wall), or on the top (on the ceiling or under an eave or overhang). 1. Use your mobile device to test the places where you are considering mounting the camera. Hold the device in that location; if you still have a WiFi signal on your device, the location should be okay. Attach the camera stand if you have not already done so. 2. Unplug the camera from the power source and install it. 3. After the camera is installed, reconnect power. Mount the AppCam 25HD Base 1. Hold the base of the camera stand where you want to mount it and mark the location of the screw holes. 2. Use the included screws and anchors to attach the base to the wall or ceiling. You can also screw the base into a flat surface such as a tabletop if needed. 3. Before attaching the camera, tug gently on the stand to make sure it is securely in place. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
15
•
Avoid pointing the camera directly at any bushes, tree branches, or moving
objects that might naturally move due to winds. Otherwise, the motion
detection feature may record unnecessarily.
You can mount the AppCam 25HD with the stand on the bottom ²on a flat
surface such as a table-top³, on the side ²on a wall³, or on the top ²on the ceiling
or under an eave or overhang³.
1. Use your mobile device to test the places where you are considering
mounting the camera. Hold the device in that location; if you still have a
WiFi signal on your device, the location should be okay.
Attach the camera stand if you have not already done so.
2. Unplug the camera from the power source and install it.
3. After the camera is installed, reconnect power.
Mount the AppCam 25HD Base
1. Hold the base of the camera
stand where you want to mount it
and mark the location of the screw
holes.
2. Use the included screws and
anchors to attach the base to the
wall or ceiling. You can also screw
the base into a flat surface such as a
tabletop if needed.
3. Before attaching the camera, tug gently on the stand to make sure it is
securely in place.