Uniden APPCAM25HD English Owner's Manual - Page 16
Attach the AppCam 25HD Camera
View all Uniden APPCAM25HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Attach the AppCam 25HD Camera 1. For each AppCam 25HD, attach the camera bracket to the mounting screw. You can attach the stand to 2 Tighten the brace against the camera to secure it in place. 1 Attach the camera to the mounting screw and turn it to the desired direction. the top or the bottom of the AppCam 25HD as needed. Tighten it a few turns, then turn the AppCam 25HD to face the direction you want. 2. Tighten the camera brace up 3 Loosen the wingnut to unlock the mounting post. 4 Adjust the post to the correct angle, then tighten the wingnut to lock the post into place. against the AppCam 25HD to secure it into place. 3. Unlock the mounting post by turning the wingnut to the left a few turns. 4. Set the mounting post to the correct angle, then tighten the wingnut until the post is locked into place. 5. After the AppCam 25HD camera is installed, reconnect power. 16