Vtech VT20-2481 User Manual - Page 6
Spare Battery Charger/Power Backup Function, Dial Tone - phone
UPC - 735078001382
View all Vtech VT20-2481 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting Started Getting Started Dial Tone Checking for Dial Tone After the battery is charged press a LINE Key on the Handset. PHONE ON will appear on the handset display, and you will hear dial tone. If not, see In Case of Difficulty. Tone/Pulse Selection Your GIGAPHONE is set for TONE dialing. See Handset and Base SettingsSELECT TONE/PULSE AT THE BASE UNIT for details. CAUTION: Use only the Vtech power supply provided with your cordless phone. IMPORTANT: FOR MAXIMUM PERFORMANCE OF YOUR CORDLESS TELEPHONE SYSTEM: 1. Choose a central location for your Base Unit. 2. Install your Base Unit and Extension Handsets away from electronic equipment, such as personal computers, television sets and microwave ovens. 3. In locations where there are multiple cordless telephones, separate base units as much as possible. 4. Install your telephone equipment away from heat sources and sunlight. 5. Avoid excessive moisture, dust or extreme cold. BEFORE USING YOUR HANDSET(S), CAREFULLY PEEL OFF THE PROTECTIVE FILM, COVERING THE DISPLAY. Spare Battery Charger/Power Backup Function The GIGAPHONE uses the spare battery charger in the Base Unit to provide operational backup in the event of a power failure. With the a fully charged battery pack in the spare battery charger, you will still be able to place and receive calls from the Handset for up to one hour. During Power Backup mode, you will not be able to use the Base Unit. The spare battery pack can also be used to replace a drained handset battery, ensuring uninterrupted use. NOTE : When using the GIGAPHONE during Power Backup mode, audio quality may be compromised due to reduced power availability. + ! 8L55 1. Open the spare battery charger by pressing the release button, located on the left-hand side of the Base Unit. A drawer will open to reveal the spare battery compartment. 2. Place a battery pack in the 1 drawer with the charge contacts facing up and to the right. 3. Push the drawer closed. The spare battery takes 24 hours to fully charge a drained battery. SIDE UP THIS INSTALL BATTERY 80-5017-00-00 USE ONLY VTECH REDUCE RISK OF FIRE, CAUTION: TO 3 2 10 11