Vtech i5868 User Manual - Page 13

Getting Started Registration of Accessory Handset Registration of Accessory Handset After charging, the screen will display: • Enter the BASE ID Code located on the underside of the Base Unit. • Press OK to complete the registration process. Register Enter Base ID ok NOTE: If after charging the Handset displays "Searching for Base...", press the NEW softkey. "Enter Base ID" will now be displayed. Follow the above steps. Wait approximately 15 - 60 seconds. You will hear confirmation beeps from the Base and Handset. The newly registered Handset will now be assigned the lowest extension number not previously assigned to a different system Handset (1 - 8). If you do not enter the correct digit sequence, you will see Invalid Base ID! and hear an error tone. Press the left NavKey to backpace or press the right softkey to erase a character, and carefully re-enter the Base ID Code. NOTE: The 15-digit BASE ID Code may contain numbers and characters, including 0 through 9, as well as *. Make sure you enter all 15 digits. Congratulations! You can now enjoy the benefits of your VTech Multi-Handset system. 13