Vtech i5868 User Manual - Page 8
Setup - cordless phone
UPC - 735078006875
View all Vtech i5868 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started Setup As you register additional Handsets to the system, they will be assigned extension numbers in the following order: HANDSET 2, HANDSET 3, etc. Whenever charged Handset battery cells are installed, the Handset will automatically begin Searching for Base... (if previously registered), or it will prompt you to Enter Base ID to register the new Handset. Charging of the Handset Battery Cells The Handset of your i 5867 cordless telephone is powered by rechargeable battery cells which charge automatically whenever the Handset is in its Base Unit or charger. Maximum talk time on fully charged cells is 8 hours, and maximum standby time is 5 days. You should charge the battery cells for at least 12 hours when you first receive your phone. You'll know the battery cells need charging when: • The low battery message is displayed: • The Handset seems completely dead, the LCD is completely clear and does not activate when you press the keys. 1 LOW BATTERY IMPORTANT: REDIAL 12:30 PM CID LOG 1. Do not dispose of battery cells in a fire, they may explode. 2. Do not open or mutilate the battery cells. Toxic substances may be released, causing harm to the eyes and/or skin. 3. Be careful when handling battery cells in order to prevent an accidental short of the charge contacts, potentially causing the battery cells to overheat. 4. Do not dispose of the battery cells into household garbage. Connecting to Phone Line Plug one end of the telephone line cord into the jack on the bottom of the Base Unit. Plug the other end of this cord into the wall jack. Checking for Dial Tone After the battery cells are charged press ON on the Handset. The phone icon will appear on the Handset display, and you will hear dial tone. If not, see In Case of Difficulty. 8