Weider 4990 I Uk Manual - Page 10
the Seat Frame 2. Attach the Leg to the Seat
View all Weider 4990 I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Orient the Leg (21) as shown. Insert the indicated bracket on the Leg (21) into the Seat Frame (2). Attach the Leg to the Seat Frame with an M10 x 93mm Bolt (99), two M10 Curved Washers (20), and an M10 Locknut (68); do not tighten the Locknut yet. Next, attach the Leg (21) to the Long Base (1) with two M10 x 103mm Bolts (57), four M10 Washers (73), and two M10 Locknuts (68); do not tighten the Locknuts yet. 7 21 68 20 Bracket 2 68 73 1 20 73 99 57 8. Apply grease to an M10 x 75mm Bolt (94). 8 Orient the Leg Lever (3) as shown. Attach the Leg Lever (3) to the Leg (21) with the M10 x 75mm Bolt (94), two M10 Washers (73), and an M10 Locknut (68). Do not overtighten the Locknut; the Leg Lever must pivot easily. 68 73 21 73 3 94 Grease 9. Attach the Top Frame (8) to the Upright (5) with two M10 x 103mm Bolts (57), four M10 9 Washers (73), and two M10 Locknuts (68); do not tighten the Locknuts yet. Then, attach the Top Frame (8) to the Weight Guides (4) with two M10 x 25mm Screws (60) and two M10 Washers (73). See steps 5 through 9. Tighten all of the M10 Locknuts (68). 60 8 73 68 73 73 4 5 57 10