Weider 4990 I Uk Manual - Page 11

M8 x 42mm Bolt 62, two Small M8 Washers

Get Weider 4990 I PDF manuals and user guides View all Weider 4990 I manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

10. Apply grease to a 1/2" x 7" Bolt (64). Orient the Arm Frame (9) as shown. Attach the Arm Frame (9) to the Top Frame (8) with the 1/2" x 7" Bolt (64), two 1/2" Washers (72), and a 1/2" Locknut (70). Do not overtighten the Locknut; the Arm Frame must pivot easily. 10 8 64 Grease 72 9 72 70 11. Apply grease to an M8 x 42mm Bolt (62). Hold the Lock Rod (46) inside the bracket on the Upright (5). Attach the Lock Rod with the M8 x 42mm Bolt (62), two Small M8 Washers (74), and an M8 Locknut (69). Do not overtighten the Locknut; the Lock Rod must pivot easily. Then, tighten the Lock Knob (45) onto the end of the Lock Rod (46). 11 69 74 46 45 5 Grease 74 62 12. Apply grease to an M8 x 63mm Bolt (61). 12 Attach a U-bracket (22) to one side of the Upright (5) with the M8 x 63mm Bolt (61), two Small M8 Washers (74), and an M8 Locknut (69). Do not overtighten the Locknut; the Ubracket must pivot easily. Attach the other U-bracket (22) to the Upright (5) in the same way. 61 22 Grease 74 22 74 5 69 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
11
10. Apply grease to a 1/2" x 7" Bolt (64).
Orient the Arm Frame (9) as shown.
Attach the Arm Frame (9) to the Top Frame (8)
with the 1/2" x 7" Bolt (64), two 1/2" Washers
(72), and a 1/2" Locknut (70).
Do not over-
tighten the Locknut; the Arm Frame must
pivot easily.
10
8
9
64
72
72
70
11. Apply grease to an M8 x 42mm Bolt (62).
Hold the Lock Rod (46) inside the bracket on
the Upright (5). Attach the Lock Rod with the
M8 x 42mm Bolt (62), two Small M8 Washers
(74), and an M8 Locknut (69).
Do not over-
tighten the Locknut; the Lock Rod must
pivot easily.
Then, tighten the Lock Knob (45) onto the end
of the Lock Rod (46).
11
12. Apply grease to an M8 x 63mm Bolt (61).
Attach a U-bracket (22) to one side of the
Upright (5) with the M8 x 63mm Bolt (61), two
Small M8 Washers (74), and an M8 Locknut
(69).
Do not overtighten the Locknut; the U-
bracket must pivot easily.
Attach the other U-bracket (22) to the
Upright (5) in the same way.
12
5
5
62
74
69
74
45
46
22
Grease
69
74
Grease
61
Grease
74
22