Weider 4990 I Uk Manual - Page 6

M6 Washer (79) Small M8 Washer (74) M10 Washer (73) Large M8 Washer (98) 1/2" Washer (72) M10 Curved Washer (20) 5/8" Washer (71) 13mm Washer (78) 26mm Washer (77) ASSEMBLY To make assembly easier, carefully read the following information and instructions: • The following tools (not included) may be required for assembly: • Assembly requires two persons. • Because of its weight and size, assemble the weight system in the location where it will be used. Make sure that there is enough clearance to walk around the weight system. two adjustable wrenches one rubber mallet one standard screwdriver one Phillips screwdriver • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly may be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. • For help identifying small parts, use the PART IDENTIFICATION CHART on pages 5 and 6. 1. Orient the Short Base (6) and the Long Base 1 (1) as shown. Attach the Short Base (6) to the Long Base (1) with two M10 x 103mm Bolts (57), four M10 Curved Washers (20), and two M10 Locknuts (68). 20 57 6 20 68 20 1 20 57 6