Weider 7000 Crosstrainer English Manual - Page 21
WEIDER, SPORTING, GOODS, fitwoallile00
View all Weider 7000 Crosstrainer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
PAGE 20 WEIDER SPORTING GOODS STEP 15 UPPER PULLEYS fir CABLE ASSEMBLY ...... 63 5/16" X 3" HEX HEAD BOLT 70 5/16' FLAT WASHER 71 5/16' NYLON LOCK NUT 72 3/8" X 21/2' HEX HEAD BOLT 73 3/8" X 13/4' HEX HEAD BOLT 78 3/8" FLAT WASHER 79 3/8' NYLON LOCK NUT vr 91 X 1/2" ZINC BUSHING 92 1/2' METAL SPACER 2 1 ID Locate the PEC-DECK CABLE (37). The Pec-Deck Cable is 127 inches long and has a Rubber Ball stop on one end and a loop on 5 the other end. 2 6 El Insert the PEC-DECK CABLE (37) up through the slot in the front of the TOP FRAME (8) so the Rubber Stop Ball is to the front and underneath the Top Frame. 2 Drape the PEC-DECK CABLE (37) over a 41/2" PULLEY (50) and assemble the Pulley into the slot at the front of the TOP FRAME (8). Attach using a 3/86 X 21/2" HEX HEAD BOLT (72), 3/8" 8 FLAT WASHER (78), and 1/2" METAL SPACER (92). Insert the Bolt with 72 the Spacer and Washer 92 through the Frame and Pulley and then assemble another 1/2" METAL fagoint9 SPACER (92) and 3/8" FLAT WASHER (78) onto the Bolt and fasten with a 3/8" NYLON LOCK NUT (79). (SEE DETAIL A.) 0 Bring Cable back down across the top of the Top Frame and through the welded pulley bracket insert the entire Cablp down through the cable access hole behind the welded bracket. 50 37 2 8 a CO WELDED 79 PULLEY BRACKET 51 73 fitwoallile00 0 Fit the Cable over a31/2' PULLEY (51) and bolt the Pulley Into the welded bracket Secure with a 3/8" X 1 3/4" HEX HEAD BOLT (73) and a 3/8' NYLON LO. .CK NUT (79). • 78 0 Leave some of the Cable draped down between the Guide Rods. This area of . the Cable will be assembled later. The amount of the Cable left draped Is not. critical as • you will be pulling the slack out of the Cable once the Cable is fastened. 2 78 79 50 DETAIL A