Weider Club 16.6st English Manual - Page 10

15. See the inset drawing. Attach the Military 15 Press Arm (84) to the Pivot Arm (101) with two M8 x 55mm Bolts (33) and two M8 Nylon Locknuts (3). Press two 38mm Square Inner Caps (32) into the Military Press Arm (84). Press two 25mm Round Inner Caps (49) into the Military Press 21 Arm. Attach the Pivot Arm (101) to the Assist Upright (74) with an M10 x 80mm Bolt (67) and an M10 Nylon Locknut (21). Do not over- tighten the Locknut; the Pivot Arm must 74 be able to pivot easily. 32 49 49 32 84 101 67 56 33 101 16. Press two 25mm x 50mm Inner Caps (107) into the Assist Arm (105). 16 Attach the Assist Arm (105) to the Leg Press Upright (56) with an M10 x 150mm Bolt (106), two M10 Washers (9), and an M10 Nylon Locknut (21). Do not overtighten the Locknut; the Assist Arm must be able to pivot easily. Note: (See the inset drawing.) The Assist Arm must be attached to the lowest hole in the Leg Press Upright (56). The Assist Arm must also be below the welded bracket on the Assist Upright (74). 74 105 84 3 56 106 9 107 9 21 ARM ASSEMBLY Bracket 105 74 56 10