Weider Club 16.6st English Manual - Page 5
Frame Assembly
View all Weider Club 16.6st manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2. Slide the Assist Upright (74) and the Leg Press Upright (56) onto the indicated M8 x 65mm Carriage Bolts (1) in the Stabilizer (5). The high side of the brackets on the Assist Upright and Leg Press Upright should be on the side shown. Hand tighten four M8 Nylon Locknuts (3) onto the Carriage Bolts. Do not tighten the Nylon Locknuts yet. Press two 50mm Square Inner Caps (27) into the Leg Press Upright (56). Press a 50mm Square Inner Cap into the Assist Upright (74). Attach the Rubber Bumper (91) to the Leg Press Upright (56) with the M4 x 16mm Selftapping Screw (87). 2 27 74 87 91 27 3 3 3 1 3. Slide the Front Upright (42) onto the M8 x 65mm Carriage Bolts (1) in the Base (4). 3 Hand tighten an M8 Nylon Locknut (3) onto each Carriage Bolt. Do not tighten the Nylon Locknuts yet. Press a 25mm Square Inner Cap (6) into the Front Upright (42). 27 High Sides of Brackets 56 3 5 1 FRAME ASSEMBLY 4 1 42 6 3 5