Weider Club 16.6st English Manual - Page 20
Front Seat Frame to the Front Upright with an
View all Weider Club 16.6st manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
SEAT ASSEMBLY 43. Attach the Front Backrest (41) to the Front 43 Upright (42) with two M6 x 65mm Screws (43) and two M6 Washers (10). The Backrest must be oriented as shown. 42 41 43 10 44. Press a 38mm Square Inner Cap (32) into the Front Seat Frame (36). 44 Insert an M6 x 50mm Carriage Bolt (38) through the center hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two M6 x 16mm Screws (18). Insert the M6 x 50mm Carriage Bolt (38) through the indicated hole in the Front Seat Frame (36). Tighten an M6 Nylon Locknut (2) with an M6 Washer (10) onto the Carriage Bolt. Attach the other end of the Seat (13) to the Front Seat Frame (36) with an M6 Washer 45 (10) and an M6 x 50mm Screw (81). 45. Press a 38mm Square Inner Cap (32) into the Leg Lever (29). Lubricate the M8 x 55mm Bolt (33). Attach the Leg Lever (29) to the Front Seat Frame (36) with the Bolt and an M8 Nylon Locknut (3). Insert the M10 x 50mm Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten an M10 Washer (9) and an M10 Nylon Locknut (21) onto the Eyebolt. 46. Rest the Front Seat Frame (36) on the indicat- 46 ed pin in the Front Upright (42). Attach the Front Seat Frame to the Front Upright with an M8 x 70mm Carriage Bolt (14) and the Seat Knob (40). Thick End 13 38 37 18 32 36 81 10 2 Lubricate 33 35 32 36 3 29 9 21 42 40 14 36 Pin 20