Weider Club 16.6st English Manual - Page 19

40. Locate and open the parts bag labeled 40 "SEAT ASSEMBLY." Insert an M6 x 60mm Carriage Bolt (92) through the center hole in a Seat Plate (37). Attach the Seat Plate to the Rear Backrest (85) with two M6 x 16mm Screws (18). Insert the M6 x 60mm Carriage Bolt (92) through the indicated hole in the Leg Press Upright (56). Tighten an M6 Nylon Locknut (2) with an M6 Washer (10) onto the Carriage Bolt. Attach the top of the Rear Backrest (85) to the Leg Press Upright with an M6 x 65mm Screw (43) and another M6 Washer. 85 56 43 10 37 92 18 2 SEAT ASSEMBLY 41. Attach one end of a Seat (13) to the Rear Seat Frame (100) with two M6 x 16mm 41 Screws (18). Attach the other end of the Seat to the Rear Seat Frame with an M6 Washer (10) and an M6 x 65mm Screw (43). 13 100 18 42. Attach the Assist Seat (104) and the Angle Bracket (110) to the Assist Arm (105) with four M6 Washers (10), two M6 x 70mm Screws (114), and two M6 x 65mm Screws (43). 42 104 110 18 10 43 105 10 10 114 43 19