Western Digital WDBACW0020HBK User Manual - Page 57
Installing on Windows Vista or Windows 7 Computers, Run WDSmartWare.exe
UPC - 718037770604
View all Western Digital WDBACW0020HBK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
MY BOOK STUDIO AND STUDIO LX USER MANUAL Installing on Windows Vista or Windows 7 Computers To install your My Book Studio or Studio LX drive on a Windows Vista or Windows 7 computer: 1. After physically connecting the drive as shown in Figure 4 on page 8, click Cancel to close the Found New Hardware screen: Note: The WD SmartWare software will install the appropriate driver for the drive. 2. Two or three screens might appear, depending on your computer setup: IF AutoRun (AutoPlay) is . . . on your computer, THEN . . . Enabled Disabled Proceed to step 3. Skip to step 5. 3. AutoRun (AutoPlay) enabled-Click Run WDSmartWare.exe on the AutoPlay screen: USING THE DRIVE WITH WINDOWS - 52
MY BOOK STUDIO AND
STUDIO LX
USER MANUAL
USING THE DRIVE WITH WINDOWS
– 52
Installing on Windows Vista or Windows 7 Computers
To install your My Book Studio or Studio LX drive on a Windows Vista or Windows 7
computer:
1.
After physically connecting the drive as shown in Figure 4 on page 8,
click
Cancel
to
close the Found New Hardware screen:
Note:
The WD SmartWare software will install the appropriate driver for the drive.
2.
Two or three screens might appear, depending on your computer setup:
3.
AutoRun (AutoPlay) enabled—Click
Run WDSmartWare.exe
on the AutoPlay
screen:
IF AutoRun (AutoPlay) is . . . on your computer,
THEN . . .
Enabled
Proceed to step 3.
Disabled
Skip to step 5.