Xerox XDM36405M-WU User Manual - Page 106
Troubleshooting
View all Xerox XDM36405M-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Troubleshooting Maintenance In addition to the troubleshooting information contained in this section, please see the Readme file on your installation disc. The Readme file contains additional information that may help you diagnose problems with the scanner. Also visit our web site at www.xeroxscanners.com for additional technical information. Problem: The scanner won't scan. What's wrong? Check for one of these possible problems: • Is a cable loose or not plugged in securely? Inspect all cable connections. Make sure all the cables are plugged in securely. • Is the scanner's status light on? Turn on the scanner's power. If the status light doesn't come on, plug the power supply into another electrical outlet. • Did you restart the computer after installing the software? If you didn't restart the computer, it may not have loaded all of the software files. Try restarting your computer. • Did you plug the scanner into a USB hub? Try plugging the scanner directly into a USB port on the computer. • Did you select another TWAIN source for acquiring images? If you use multiple TWAIN devices with your computer, you may have selected another source for images. Make sure TWAIN:Xerox DocuMate 3640 is selected as your scanner. Problem: The installation will not complete successfully. A likely cause is that some driver programs are already installed on your computer for another scanner. They are interfering with the installation and One Touch options, and you need to remove those other drivers and re-install your Xerox DocuMate 3640 scanner. Please see the documentation that you received with the other scanner for the steps to remove its driver programs. After uninstalling the other scanner's driver programs, uninstall One Touch 4.0 using the steps on page 97, then reinstall it using the steps on page 5. Problem: My computer keeps giving me out of hard drive space error messages. The minimum requirement of 350MB free hard drive space is for the installation of the software and basic, low resolution, scanning. High resolution scans result in files that can be over 1 gigabyte in size. Free up some space on your hard drive for the software to be able to save the scanned images. Problem: With AutoCrop to Original selected, sometimes I get blank pages, or pages with lines. The pages were probably scanned in crooked, or skewed. To use AutoCrop to Original, the pages must be scanned in straight. Adjust the paper guides on the scanner so pages feed in straight. Problem: If the USB cable is disconnected during a scan, the scanner does not reconnect when the USB cable is plugged back in. Unplug the power cable from the scanner, and then plug it back in. DocuMate 3640 93 User's Guide