Xerox Z750/N Network Guide - Page 10
Setting Frame Routing from the front panel (Phaser750), Transparent, Source Route, Menu Maps.
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Token Ring Setting Frame Routing from the front panel (Phaser 750) You can set the Token Ring Frame Routing from the printer's front panel. When you have the Frame Routing set, you may want to set other Token Ring parameters. See Setting Token Ring parameters on page 7. See the table Token Ring parameters on page 6 for a list of Token Ring parameters. The choices are Transparent (no source routing) or Source Route (use source routing). 1. Press Menu; the front panel displays Menu Maps. 2. Press ----> or or until the Frame Routing choice you want is displayed. b. Press OK to enter your choice into the printer; the front panel briefly displays Selected, then returns to the Token Ring display. 6. Return the printer to normal operation: a. Press Exit until the front panel displays Network Settings. b. Press Exit again. PhaserShare Networking Manual 5
![](/manual_guide/products/xerox-z750n-network-guide-0719aa6/10.png)