Xerox Z750/N Network Guide - Page 38
IRIX 6.x with Impressario Server, IBM AIX 3.x and 4.x
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
TCP/IP Host Configuration (UNIX) IRIX 6.x with Impressario Server The following procedure describes how to use the SGI Printer Manager program to configure a workstation running IRIX 6.x with Impressario Server to support a color PostScript printer. 1. From the Toolchest, click System/Printer Manager, or type printers at the command line. 2. Click Printer and select Add from the pull-down menu. 3. Fill in the fields (refer to the following table). Click OK. Field name Description New Printer Name Name of the print queue (this can be anything). Printer Connected To Select Local Host. Location Code Optional; may contain information describing the location of the printer. Location Description Optional; may contain information describing the location of the printer. Printer Type Select one of the Generic Color PostScript entries. Printer is Attached to Select Network. Printer's Name (or IP Address) The name that you entered in your /etc/hosts file as the remote machine name. Printer is Attached to Network With Network card Installed in printer. IBM AIX 3.x and 4.x Modify the /etc/hosts file to identify the printer to the workstation: 1. Log onto your system as root. 2. Make a backup copy of the /etc/hosts file. Note You need superuser privileges to edit this file. 3. Edit /etc/hosts and add a line that defines the printer's IP address and its name. The IP address you enter here for the printer must be the same address you specified as the printer's IP address when it was configured. The name is the name by which your workstation identifies the printer. PhaserShare Networking Manual 33
![](/manual_guide/products/xerox-z750n-network-guide-0719aa6/38.png)