Xerox Z750/N Network Guide - Page 46

PhaserShare Networking Manual

41

Resetting the Printer

Resetting the Printer

Several of the network configuration procedures require you to reset the printer.

There are

several ways to reset the printer:

■

Turn the printer off, then back on again.

■

With a TCP/IP connection and a World Wide Web browser, you can use PhaserLink

Printer Management Software; see

Resetting the printer: PhaserLink Printer

Management Software

on page 41.

■

PC and UNIX users can send the PostScript file

RESET.PS

from the printer’s utilities

software.

■

Macintosh users can reset the printer using the Apple Printer Utility.

See

Resetting

the printer using the Apple Printer Utility

on page 41.

Resetting the printer by any of these methods restores the printer to its power-on

conditions (

not

its factory default conditions).

The power-on conditions include any

custom changes made to the printer that are stored in the printer’s non-volatile memory

and are therefore persistent across printer power cycles.

For example, the printer’s name

is a power-on condition that is not altered by resetting the printer.

Resetting the printer:

PhaserLink Printer

Management Software

1.

Enter the printer’s URL into a web browser.

The printer’s URL is:

2.

On the left side of the page, click

Settings.

3.

In the

Setup

group, click

Reset Printer.

For more information on PhaserLink Printer Management Software, see your printer’s

networking setup guide.

Resetting the printer using the

Apple Printer Utility

Macintosh users can reset the printer using the


.

1.

Locate the


, which is included with your printer’s network

utilities software.

2.

Double-click the


icon; the

Printer Selector

window is displayed.

3.

Select the zone (if applicable) and the printer.

Click

Open Printer

; a dialog box is

displayed containing

Printer Information

and

Printer Preferences

.

4.

From the

Utilities

menu, select

Restart Printer

.

http://

printer’s-IP-address

/

where

printer’s-IP-address

is the IP address or DNS name you set during TCP/IP

configuration.

Example using IP addess:

http://192.1.1.1/

Example using DNS name:

http://Tektronix_Marketing/

Section	Page
PhaserShare Networking Manual	1
Title Page	2
Contents	4
PhaserShare Networking Supplementary Information	6
Token Ring	7
Token Ringcard	7
Token Ring connections and indicators	8
Ring speed jumper	9
Setting Frame Routing from the front panel (Phaser750)	10
Token Ring parameters	11
Setting Token Ring parameters	12
Using the PhaserShare Administrator to configure Token Ring	12
Using PhaserLink Printer Management Software to configure Token Ring	13
Using the config-TokenRing script	13
Setting IP addressing: PostScript utility file (UNIXonly)	15
Running the config-IP script	16
Windows NT (non-Intel computers)	17
Setting the printer’s IP address	17
Adding the Windows NT 4.0 driver on a Windows NT 4.0 server or workstation	17
Add the printer	18
Creating an LPR port	18
Creating an AppleTalk port	19
Install the driver	19
Name the printer and set up sharing	19
WindowsNT creates the printer	19
Adding the Windows NT 4.0 driver on a Windows NT 3.51 server	20
Add the printer	20
Install the driver	20
Enter the printer’s name and set up sharing	21
WindowsNT creates the printer	21
Adding a Windows NT 3.x driver	21
Creating an LPR port	22
Creating an AppleTalk port	23
Set up sharing	23
Windows NT network communication	24
Basic concepts of TCP/IP printing	24
Windows NT network troubleshooting	25
Error messages in Print Manager	25
Printer PS on host IP-address is rejecting your request	25
Printer printer-name on host IP-address is rejecting your request	26
Printer PS on host IP-address is unreachable	26
The LPR print monitor failed to open a temporary file while spooling output for port IP-address:PS	26
Printing from the command line via lpr	28
Checking the IP address of the WindowsNT server	28
Novell NetWare (DOS)	29
TCP/IP Host Configuration (UNIX)	30
Extracting files from unix.tar	30
Listing the contents of unix.tar	30
Extracting the files	30
Adding the printer to the host table	30
Assigning a print queue to the printer	31
Assigning print queues with PhaserPrint for UNIX	31
Required remote printer queue names	31
Using PostScript utility files to control printer features from queues	32
UNIX model files	32
Example installation for a typical BSD UNIX system	32
Configuration procedures for common System V UNIX hosts	35
Sun Solaris	35
Adding an LPD queue in Solaris	36
If Solaris 2.2/2.3 print jobs get stuck in the queue	36
SGI IRIX 5.3 and 6.x	37
IRIX 5.3 and IRIX 6.x with Impressario Client	37
IRIX 6.x with Impressario Server	38
IBM AIX 3.x and 4.x	38
AIX 3.x	39
AIX 4.x	39
Hewlett-Packard HP-UX 9.x and 10.x	40
Troubleshooting	42
Testing the network connection	42
TCP/IP Configuration (OS/2 Warp/LAN Server)	43
Setting the printer’s IP addressing parameters	43
Creating an LPR queue in OS/2 Warp Connect (direct LPR connection to the printer)	43
OS/2 client-to-server setup	44
Warp Server 4.0/Warp Connect	45
Resetting the Printer	46
Resetting the printer: PhaserLink Printer Management Software	46
Resetting the printer using the Apple Printer Utility	46
FTP Interface	47
Usage Profile Report fields	48
Job Report fields	48
Full Report fields	49
Logs	56
Postscript Error Log	57
Engine Error Log - Phaser 850	58
Print Head Clean Source Log - Phaser 850 (Full Report Line 282)	58
Last Jam Location Log - Phaser 850 (Full Report Line 291)	58
Last Jam Media Tray Log - Phaser 850 (Full Report Line 292)	58
Last Jam Media Log - Phaser 850 (Full Report Line 293)	59
Last Jam Transfix Speed Log - Phaser 850 (Full Report Line 296)	59
Last Jam Location Log - Phaser 750 (Full Report Line 291)	59
Last Jam Media Tray Log - Phaser 750 (Full Report Line 292)	59
Last Jam Media Log - Phaser 750 (Full Report Line 293)	60

Xerox Z750/N Network Guide - Page 46

Resetting the Printer, Resetting the printer: PhaserLink Printer Management Software

Page 46 highlights