Xerox Z750/N Network Guide - Page 23
Creating an AppleTalk port, Set up sharing, Add Network Software
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Windows NT (non-Intel computers) Creating an AppleTalk port 1. In the Printer Port dialog box, double-click the AppleTalk Printing Devices port. If the AppleTalk Printing Devices port is not listed in the Printer Port dialog box, the Microsoft Services for Macintosh needs to be added to the Windows NT machine: a. In Control Panel, double-click Network; the Network Settings dialog box appears. b. In the Network Settings dialog box, click Add Software; the Add Network Software dialog box appears. c. In the Add Network Software dialog box, click the drop down menu for Network Software. In the list, select Services for Macintosh, then click OK to install the service. The original Windows NT distribution diskettes are needed during installation. To apply these changes, restart Windows NT. 2. In the Available AppleTalk Printing Devices dialog box, select the zone where the printer resides. If no zone name appears, double-click the zone icon. 3. Windows NT searches for all AppleTalk devices in that zone and displays a list; double-click your printer. 4. Windows NT prompts you to capture the printer; click No. (Capturing the printer causes it to disappear from the Chooser.) Set up sharing If this printer is to be shared on the network, perform the following steps: 1. In the Create Printer dialog box, check the option Share this printer on the network. 2. Enter any name you want for the Share Name. 18 PhaserShare Networking Manual
![](/manual_guide/products/xerox-z750n-network-guide-0719aa6/23.png)