Xerox Z750/N Network Guide - Page 8
Token Ring connections and indicators, PhaserShare, Series B, Token Ring Card
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Token Ring Token Ring connections and indicators The PhaserShare Token Ring card has the following connections and indicators on the rear panel: 1. Shielded Twisted Pair (STP; IBM Type 1) connector (DB-9). Note The STP port on the PhaserShare Token Ring card supports cable lengths up to 150 meters (492 feet) from the interface to the MAU (Medium Access Unit), including lobe and patch cables. 2. Unshielded Twisted Pair (UTP; IBM Type 3) connector (RJ-45). 3. Ring speed indicator (yellow); on indicates 16 Mbps, off indicates 4 Mbps. 4. TX indicator (yellow); blinks while the interface is transmitting. 5. Connection indicator (green); on indicates that the card is asserting its ring insertion control signal. 6. RX indicator (green); blinks while the interface is receiving. 1 2 34 PhaserShareTM Series B Token Ring Card STP 16 Mbs TX INS RX UTP 56 9789-06 PhaserShare Networking Manual 3
![](/manual_guide/products/xerox-z750n-network-guide-0719aa6/8.png)