Xerox Z750/N Network Guide - Page 17
Windows NT (non-Intel computers), Setting the printer’s IP address - tektronix phaser
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Windows NT (non-Intel computers) Windows NT (non-Intel computers) These procedures are valid for Windows NT version 3.x and 4.x. For information about driver installation for later versions of Windows NT, contact Tektronix technical support or visit the Tektronix web site: www.tek.com/Color_Printers/support/ Setting the printer's IP address There are three ways to set the printer's IP address: s Use the printer's front panel. For more information, see your printer's networking setup guide. s Use DHCP. For more information, see your printer's networking setup guide. s Download a PostScript utility file. For more information, see the README file on the printer's CD-ROM. The README file is in the UTILS directory. Adding the Windows NT 4.0 driver on a Windows NT 4.0 server or workstation The Windows NT 4.0 PostScript driver is a PPD-based driver. Follow these instructions to add or update the Tektronix Phaser PPD for use with Windows NT 4.0. Adding this support gives your printer access to Tektronix page sizes, tray selection, TekColor color corrections, and resident fonts. This update procedure provides printer page-size information for Windows NT applications. These instructions assume a basic familiarity with Windows NT operation and terminology. For additional information about Windows NT, refer to your Microsoft Windows NT documentation. Note You may need the Windows NT 4.0 CD-ROM or your printer's software CD-ROM to complete this procedure. 12 PhaserShare Networking Manual