Xerox Z750/N Network Guide - Page 35
Configuration procedures for common System V UNIX hosts, Sun Solaris
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
TCP/IP Host Configuration (UNIX) Configuration procedures for common System V UNIX hosts Sun Solaris For Solaris version 2.6 and later, go to Adding an LPD queue in Solaris on page 31. For Solaris 2.5x and older, use the sol_apps.tar provided with your printer's networking software to avoid a Solaris communication problem. The sol_apps.tar file is also available from the Tektronix ftp site: ftp.tek.com/cpid/UNIX/sun/sol_apps.tar This file redirects the print jobs to the printer's AppSocket port (port 9100) instead of the LPD port (port 515). Note If you do not want to redirect the print jobs to the printer's AppSocket port, see Adding an LPD queue in Solaris on page 31. 1. Untar the sol_apps.tar file by typing this command: tar -xvf phaser.sun5 The following files are extracted into the indicated directories: asprint.sun5 to /usr/bin tektcp.sun5 to /usr/spool/lp/model 2. Edit the file /etc/hosts to create an entry for the printer. Note The network name and the queue name for your printer must be identical for the model file to work. 3. Execute the following commands: lpadmin -p queuename -v /dev/null -i /usr/spool/lp/model/tektcp.sun5 -I postscript enable queuename accept queuename where queuename is the name entered for the printer in the /etc/hosts file. The print queue is now enabled. 30 PhaserShare Networking Manual
![](/manual_guide/products/xerox-z750n-network-guide-0719aa6/35.png)