Yamaha AW4416 Owner's Manual - Page 112

Chapter5-Recording on the AW4416 Using the internal effects The AW4416 provides two internal effects, which can be used either via AUX send/return or by being inserted into a specific channel. Here we will explain how to use the AUX bus to apply reverb to the signals of the tracks. 1. Press the [AUX 7] key ¡ [F2] key. The AUX7/EFF1 screen Library page will appear. In this page you can load or save effect programs from or to the effect library. The list in the display shows the effect programs that have been saved. Tip! When the AW4416 is in the initial state, the outputs of AUX buses 7/8 are patched to the inputs of internal effects 1/2, and the outputs of internal effects 1/2 are patched to return channels 1/2. 2. Move the cursor to the library list, and rotate the [DATA/JOG] dial to display "002.Reverb Room" at the cursor location. In this example we will select a reverb room program. Tip! If desired, you can recall the effect program directly without having to reply to the recall confirmation popup window. To make this setting, access the UTILITY screen Prefer.1 page ([UTILITY] key ¡ [F2] key), and turn RECALL CONFIRMATION off. 3. Move the cursor to the RECALL button and press the [ENTER] key. A CONFIRMATION popup window will appear, asking you to confirm the recall operation. 4. Move the cursor to the OK button and press the [ENTER] key. The "Reverb Room" effect program will be loaded into internal effect 1. 99 - Operation Guide