Yamaha AW4416 Owner's Manual - Page 183
To insert effect 2, move the cursor to the INT.EFF2 button and press
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Chapter10-Internal effects 4. To insert effect 2, move the cursor to the INT.EFF2 button and press the [ENTER] key. In the popup window, SEND will change to "EFF2," and RTN. will change to "EFF 2L." This indicates that the input of effect 2 has been patched to the insert send of monitor channel 1, and the L output of effect 2 has been patched to the insert return. Tip! • Regardless of the channel, the effect will be inserted at a position immediately after the attenuator. • If you move the cursor to the RTN. field and rotate the [DATA/JOG] dial, you can switch between "EFF 2L" and "EFF 2R." • If an effect is inserted into a stereo channel (return channels 1/2, stereo output channel), the L/R outputs of the effect will be returned to the L/R of that channel. 5. When you have finished making settings in the EFF.INSERT SETTING popup window, move the cursor to the OK button and press the [ENTER] key. The EFFECT INSERT field of the CH View page will be displayed as "ON [INT.EFF2]." This indicates that effect 2 has been inserted into the corresponding channel (in this case, monitor channel 1). An effect that has been inserted into a channel will be usable only for that channel until you insert the same effect into a different channel or turn on the OFF button in the EFF.INSERT SETTING popup window. 173 - Operation Guide