Yamaha AW4416 Owner's Manual - Page 84
word clock slave, AW4416
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Chapter4-Connections and setup ❍ Using a digital MTR as the word clock master (1) This method uses a digital MTR as the word clock master, and causes the AW4416 to synchronize to the word clock included in the input signal from the digital I/O card. For this method, turn on one of the 1/2-7/8 buttons for the slot to which that digital MTR is connected. PROFESSIONAL AUDIO WORKSTATION OPTION SLOT 1 Sync Out Word clock Digital MTR (word clock master) Word clock AW4416 (word clock slave) WORD CLOCK SOURCE= SLOT 1 1/2-7/8 OPTION SLOT 2 Sync In Digital MTR (word clock slave) • Set the digital MTR so that it will operate according to its own internal clock. • If you are using two digital MTR units, connect the Sync Out jack of the first to the Sync In jack of the second as shown here, so that the second digital MTR will follow the first. ❍ Using a digital MTR as the word clock master (2) This method uses a digital MTR as the word clock master, and causes the AW4416 to synchronize to the word clock supplied from the word clock output jack of the digital MTR to the WORD CLOCK IN jack of the AW4416. For this method, turn on the WCLK IN button. Word Clock In Word clock PROFESSIONAL AUDIO WORKSTATION OPTION SLOT 1 Word Clock Out Sync Out Digital MTR (word clock master) Word clock AW4416 (word clock slave) WORD CLOCK SOURCE= WCLK IN OPTION SLOT 2 Sync In Digital MTR (word clock slave) • Set the digital MTR so that it will operate according to its own internal clock. • If you are using two digital MTR units, connect the Sync Out jack of the first to the Sync In jack of the second as shown here, so that the second digital MTR will follow the first. 70 - Operation Guide