Yamaha CLP-150 Owner's Manual - Page 59

Connections Connectors CAUTION Before connecting the Clavinova to other electronic components, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may occur. CLP-170 IN AUX PEDAL 1 OUT MIDI 2 THRU PC-2 Mac MIDI USB HOST SELECT 3 TO HOST 4 USB 5 L/L+R R L/L+R R LEVEL FIXED L R AUX IN 6 AUX OUT 7 7 LEVEL FIXED 6 CLP-150 R L R AUX OUT L/L+R R L/L+R AUX IN IN AUX PEDAL 1 OUT MIDI 2 THRU PC-2 Mac MIDI USB HOST SELECT 3 TO HOST 4 USB 5 1 AUX PEDAL jack A separately sold FC7 foot controller or FC4/FC5 foot switch can be connected to this jack. By using an FC7 you can control the volume while playing to add expression to your performance, or control various other functions. By using an FC4/FC5, you can switch various selected functions on/off. To select the function that will be controlled, use the [VOICE SETTING] parameter [AuxPedal] (See page 84). The SONG [START/STOP] function can also be assigned to a foot switch (See page 94). 2 MIDI [IN], [OUT], [THRU] connectors Use MIDI cables to connect external MIDI devices to these connectors. Make sure you set the HOST SELECT switch (described on the privious page) to MIDI when you use these connectors. 3 HOST SELECT switch This switch should be set according to the type of connected MIDI device or personal computer. (Refer to "Connecting a personal computer" on page 61 for more information.) 4 TO HOST jack This jack allows direct connection to a personal computer. (Refer to "Connecting a personal computer" on page 61 for more information.) 5 USB jack This jack allows direct connection to a personal computer. (Refer to "Connecting a personal computer" on page 61 for more information.) TIP Connect or disconnect the pedal when the power is off. CLP-170/150 59