Yamaha CVP-69 Owner's Manual - Page 24
Changing the Split Point
View all Yamaha CVP-69 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Split Mode Changing the Split Point The split point can be set at any key by pressing the desired key while holding the [SPLIT] button. The split point key name will appear in the SPLIT POINT section of the display. CLAVI. TONE/ UITAR SYNTH DUAL EFFECT BASS DRUMS/ PERC. SPLIT The split point can also be set by using the SPLIT POINT LCD buttons, or the data dial or [+]/[-] buttons once the SPLIT POINT section of the display has been highlighted. The keyboard guide lamp corresponding to the selected split point will light. • The dual and split modes cannot be used at the same time. • Whether the damper pedal affects the left voice only, the right voice only, or both voices is determined by the "DAMPER RANGE" function described on page 93 (the default is right-hand voice only). • The OCTAVE SHIFT function - page 91 - can be used to shift the pitch of the left- and/or right-hand voice in the SPLIT mode up or down one octave. • When the ABC Single Finger or Fingered mode (page 35) and the split mode are used simultaneously, the left-hand voice will be accompanied by the appropriate ABC chord voices. • The SPLIT mode balance and split point settings affect all voice combinations. • The SPLIT mode settings are retained even if the SPLIT mode is turned off and on while the power remains on. The SPLIT mode settings can also be backed up even after the power is turned off via the "Backup" function - page 107. The default split point - F#2 - can be recalled by simultaneously pressing the SPLIT POINT LCD buttons or [+] and [-] buttons. The SPLIT mode can be turned off by pressing the [SPLIT] button so that its indicator goes out. 21