Yamaha CVP-69 Owner's Manual - Page 28
One-touch Preset Recall, Effect Depth Control
View all Yamaha CVP-69 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Voice Effects PHASER AUTO WAH TOUCH WAH (CVP-79A only) Pronounced, metallic modulation with periodic phase change. Repeating filter sweep "wah" effect. Wah effect that varies filter sweep according to touch. COMPRESSOR (CVP-79A only) BOOST HL Affects the dynamics of the sound by smoothing out the high-volume peaks and soft-volume dips. Equalizer to boost high and low frequencies. Effect Depth Control When a single voice is selected only one depth parameter will appear. When the DUAL or SPLIT mode is engaged, separate depth parameters will appear for the main and 2nd (dual) or right- and left-hand (split) voices. The depth of the selected effect can be increased or decreased by using the DEPTH1(R) and/or DEPTH2(L) LCD buttons, or the data dial or [+]/[-] buttons when the DEPTH1(R) or DEPTH2(L) parameter is highlighted. The DEPTH1(R) and DEPTH2(L) buttons can be held to only increase the depth of the corresponding voice. The depth range is from "0" (no effect) to "100" (maximum effect depth). The default DEPTH1(R) or DEPTH2(L) setting can be instantly recalled for either depth parameter by simultaneously pressing the [+] and [-] buttons while the desired depth parameter is selected - DEPTH2(L) is reset to "50". • The main or right-hand voice effect type is commonly used for the 2nd or left-hand voice. • The depth can be adjusted in five step intervals. • The DEPTH1(R) and/or DEPTH2(L) value for some effect types may be fixed to 100 and/or 0 respectively and cannot be changed. -+ One-touch Preset Recall Press the PRESET LCD button to instantly recall the preset effect type and DEPTH1(R) settings for the current voice. The DEPTH2(L) setting is not affected. • Each voice has its own individual default effect on/off, type, and depth settings. Your own settings can be backed up via the Backup function described on page 107. • The DEPTH2(L) setting affects all voices. Its default value is "50", but your own setting can be backed up via the Backup function described on page 107. 25