Yamaha HTR 5860 MCXSP10 Manual - Page 30

p p p p AUTO SETUP The results displayed in the RESULT:EXIT screen are as follows: SP DIST LVL The number of connected speakers displayed in the order: Front/Back/Subwoofer The distance of the speakers from this unit displayed in the order: Closest speaker distance/Farthest speaker distance The speaker output level displayed in the order: Lowest output level/Highest output level • If you selected AUTO in step 5, "WAITING" appears when the auto setup procedure is started, then loud test tones are output from each speaker in turn. • If you selected DEFAULT, RELOAD or UNDO in step 5, no test tones are output. • If an ERROR screen appears, see "If an error screen appears" on page 26. • If a WARNING screen appears, see "If a warning screen appears" on page 27. y You can display the detailed result information by using d and ENTER to select "RESULT". In the detailed result information screen, you can switch information by pressing u / d / j / i. ■ If an error screen appears Use u / d / j / i to select RETRY or EXIT, then press ENTER. RETRY EXIT ERROR . E-9:USER CANCEL . . Don't operate . any function. . >RETRY EXIT [ ]/[ ]:Up/Down [ENTER]:Enter To retry the auto setup procedure. To exit auto setup. 7 Press j / i to select SET or CANCEL, then press ENTER to return to the SET MENU screen. RESULT:EXIT WARNING (3) RESULT SP : 5/4/0.1 DIST: 10.0/ 12.0ft LVL : -9.0/ +6.5dB . >SET CANCEL [ ]/[ ]:Up/Down [ENTER]:Enter SET CANCEL To apply the auto setup (YPAO) settings. To cancel the auto setup (YPAO) without making any changes. y If you are not satisfied with the result or want to manually adjust each setup parameter, use the manual setup parameters (see page 59). Notes • If E-10 appears during testing, restart the procedure from step 3. • To cancel the auto setup procedure before completion, press u. 26