Yamaha HTR 5860 MCXSP10 Manual - Page 31
WARNING:W-1, RESULT:EXIT, If a warning screen appears - problem
UPC - 027108922096
View all Yamaha HTR 5860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
PREPARATION p ■ If a warning screen appears 1 Press ENTER to display detailed information about the warning. Press j / i to switch between warning messages. RESULT:EXIT . WARNING (3) RESULT SP : 5/4/0.1 DIST: 10.0/ 12.0ft LVL : -9.0/ +6.5dB . >SET CANCEL [ ]/[ ]:Up/Down [ENTER]:Enter p WARNING:W-1 . . Reverse Channel . FL __ . CENTER . PL PR . SL SR . SBL SBR []:Select [ENTER]:Return W-1 warning screen For details about each message, see page 29. y • Warnings let you know about potential problems detected during auto setup. Warnings will not cancel the auto setup. • The number of warnings is displayed to the right of "WARNING". • When the warning is not applicable to a speaker, "- -" is displayed. 2 When you are finished, press ENTER to return to the RESULT:EXIT screen. Continue from step 7 on page 26. Notes • If you change speakers, speaker positions, or the layout of your listening environment, perform auto setup again to re-calibrate your system. • Depending on listening environments, SWFR PHASE:REV appears in AUTO:CHECK and SUBWOOFER PHASE parameter in the SETMENU (see page 65) is automatically set to REVERSE. To select the desired setting, change the SUBWOOFER PHASE parameter in the SETMENU. • In the DISTANCE results, the distance displayed may be longer than the actual distance depending on the characteristics of your subwoofer. AUTO SETUP 27