Yamaha HTR 5860 MCXSP10 Manual - Page 32
Troubleshooting for auto setup procedure, Before auto setup, Errors during auto setup - optimizer microphone
UPC - 027108922096
View all Yamaha HTR 5860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
AUTO SETUP ■ Troubleshooting for auto setup procedure Before auto setup Error message Connect MIC Cause Optimizer microphone is not connected. Unplug HP Headphones are connected. Remedy • Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. • Unplug the headphones. Errors during auto setup Error message E-1:NO FRONT SP E-2:NO SURR. SP E-3:NO PRES. SP E-4:SBR->SBL E-5:NOISY E-6:CHECK SUR. E-7:NO MIC E-8:NO SIGNAL E-9:USER CANCEL E-10:INTERNAL ERROR Cause Remedy Front L/R channel signal(s) is (are) not detected. • Select the front speakers with SPEAKERS A/B. • Check the front left and right speaker connections. • Turn on the power to the external amplifier (when the front speaker signals are output from an external amplifier). Only one surround channel signal is detected. • Check the surround speaker connections. Only one presence channel signal is detected. • Check the presence speaker connections. Only right surround back channel signal is detected. • Connect the surround back speaker to the LEFT SURROUND BACK SPEAKERS terminal if you only have one surround back speaker. Background noise is too loud. • Try the auto setup procedure in a quiet environment. • Turn off noisy electric equipment like air conditioners (etc.) or move them away from the optimizer microphone. Surround back speaker(s) is (are) connected, though surround L/R speakers are not. • Connect surround speakers when you use (a) surround back speaker(s). • Check the surround speaker connections. The optimizer microphone was unplugged during the auto setup procedure. • Do not touch the optimizer microphone during the auto setup procedure. The optimizer microphone does not detect test • Check the microphone setting. tones. • Check the speaker connections and placement. The auto setup procedure was cancelled due to • Perform the auto setup procedure again. Do not adjust user activity. VOLUME (etc.) during the auto setup procedure. A DSP communication error or hangup occurred. • Perform the auto setup procedure again. 28