Yamaha HTR 5860 MCXSP10 Manual - Page 81
Switching library codes, Clearing set up remote control codes - 7 1 receiver
UPC - 027108922096
View all Yamaha HTR 5860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Switching library codes You can select the unit you want to operate with the remote control by entering the library code. 1 Press CODE SET using a ballpoint pen or similar object. The TRANSMIT indicator on the remote control flashes twice. CODE SET TRANSMIT REMOTE CONTROL FEATURES Clearing set up remote control codes 1 Press an input selector button or to select the component control for which you want to clear the remote control code. CD MD/CD-R TUNER SLEEP DVD DTV/CBL V-AUX MULTI CH IN VCR 1 DVR/VCR2 AMP 2 Enter the code number "9991" or "9992" (see the table below). The TRANSMIT indicator on the remote control flashes twice, and the library code is changed. AMP library code (remote control setting) Function 9991 To operate this unit using the default code. 9992 To operate this unit using an alternative code. Remote control ID (unit setting: see page 73) ID1 (initial setting) ID2 When using multiple YAMAHA receivers/amplifiers, you may be able to operate the other components simultaneously with the default code setting. In this case, set one of the alternative codes to operate this unit separately. Note You must also make settings for the receiver/amplifier. 2 Press CODE SET using a ballpoint pen or similar object. The TRANSMIT indicator on the remote control flashes twice. CODE SET TRANSMIT 3 Enter the code number "0000". The TRANSMIT indicator on the remote control flashes twice, and the remote control code for the selected component is cleared. y • If you do not press any button within 30 seconds after step 2, the clearing process is canceled. If this happens, start over from step 1. • You can clear all setup remote control codes at once by entering the code number "9990". ADVANCED OPERATION 77