Yamaha HTR-6180BL Owner's Manual - Page 67

BASIC OPERATION Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 4XM. Displaying the XM Satellite Radio information You can display the XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel in the front panel display or in the OSD. Note If a status message or an error message appears in the front panel display or in the OSD, see the "XM Satellite Radio" section in "Troubleshooting" on page 113 for appropriate remedies. ■ Displaying the XM Satellite Radio information in the front panel display Press GINFO (or 0INFO) repeatedly to toggle between the following XM Satellite Radio information display modes. CHANNEL INFO e.g.) 043 XMU Channel number/name XM Satellite Radio tuning y • The front panel display can indicate up to 14 alphanumeric characters at once. You can set whether to display the XM Satellite Radio information in the front panel display in a continuous manner or by 14 alphanumeric characters at once by using the "FL SCROLL" parameter in "OPTION MENU" (see page 98). • If the XM Satellite Radio information contains a character that cannot be recognized by this unit, the character will be displayed with a space. • To hold the current XM Raido information, press 8ENTER on the remote control while it is being displayed. The HOLD indicator flashes in the front panel display while you are holding the XM information. Press 8ENTER again to release the held information. • When the antenna of the XM Mini-Tuner Dock cannot receive the signals, "NO SIGNAL" appears in the front panel display. ■ Displaying the XM Satellite Radio information in the OSD Press JDISPLAY. The following screen is displayed in the OSD. XM Information ANT: [4] [1] ALL CH SEARCH 043:XMU [5] [2] :Rock :Coldplay [6] [3] :Speed of sound CATEGORY INFO Channel category e.g.) ROCK SONG INFO e.g.) Coldplay / Sp Artist name / Song title ANTENNA INFO e.g.) 043 ANT: - Channel number/Antenna reception level DSP PROG. INFO e.g.) 7ch Enhancer Sound field program Back to "CHANNEL INFO" [1] Search mode (see page 60) [2] Channel category [3] Song title [4] Antenna reception level [5] Channel number/name [6] Artist name y • To turn off the OSD, press JDISPLAY again. • XM status messages also appear in the OSD. • You can select the amount of time the XM Satellite Radio information is displayed in the OSD by using the "OSDSOURCE" parameter in "OPTION MENU" (see page 98). • To hold the XM Satellite Radio information, press 8ENTER on the remote control while it is being displayed in the OSD. "HOLD" appears in the screen while you are holding the XM information. Press 8ENTER again or change the XM Satellite Radio channel to release the held information. • The current XM Satellite Radio reception level appears on the top of the XM Satellite Radio information screen. For the best reception, adjust the orientation of the antenna of Home Dock so that " " or " " is displayed here. " " is displayed if the antenna cannot receive the signals correctly. In this case, adjust the orientation of the antenna (see page 59). English 63 En