Yamaha HTR-6180BL Owner's Manual - Page 83
Selecting decoders, Selecting decoders used with sound, field programs SUR.
UPC - 027108930107
View all Yamaha HTR-6180BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Advanced sound configurations Sound field parameter DIRECT ("2ch Stereo" only) CT LEVEL SL LEVEL SR LEVEL SB LEVEL PL LEVEL PR LEVEL ("7ch Stereo" only) EFFECT LEVEL ("Straight Enhancer" and "7ch Enhancer" only) Features 2-channel stereo direct. Bypasses the decoders and the DSP processors of this unit for pure hi-fi stereo sound when playing 2-channel analog sources. Choices: AUTO, OFF y • Select "AUTO" to bypass the decoders, the DSP processors and the tone control circuitry only when "BASS" and "TREBLE" are set to 0 dB (see page 52). • Select "OFF" not to bypass the decoders, the DSP processors and the tone control circuitry when "BASS" and "TREBLE" are set to 0 dB. • When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2 channels and output from the front left and right speakers. • The low-frequency signals of the front left and right channels are redirected to the subwoofer in the following cases: - "LFE/BASS OUT" is set to "BOTH" (see page 87). - "FRONT SP" is set to "SMALL" (see page 88) and "LFE/BASS OUT" is set to "SWFR" (see page 87). 7-channel stereo center, surround left, surround right, surround back, presence left and presence right levels. Adjusts the volume level of each channel in the 7-channel stereo mode. The available parameters differ depending on the setting of the speakers. Control range: 0 to 100% Straight and 7-channel Compressed Music Enhancer effect level. The high-frequency signals of some sources may be emphasized too much. In this case, set the effect level to "LOW". Choices: HIGH, LOW • Select "HIGH" for a high effect level. • Select "LOW" for a low effect level. ■ Selecting decoders used with sound field programs (SUR.) Use this feature to select the desired decoder used with MOVIE sound field programs (except "Mono Movie"). See page 49 for details about MOVIE sound field program. Available decoders Decoder Functions PLIIx Movie PLII Movie Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for movie sources. The Pro Logic IIx decoder is not available when "SUR.B L/R SP" is set to "NONE" (see page 88). Neo:6 Cinema DTS processing for movie sources. Selecting decoders ■ Selecting decoders for 2-channel sources (surround decode mode) Use this feature to play back sources with selected decoders. You can play back 2-channel sources on multichannels. Set the operation mode selector to FAMP and then press MSUR. DECODE repeatedly on the remote control to select the desired surround decoder. You can select from the following modes depending on the type of source you are playing and your personal preference. y You can change the decoder parameter settings (see page 81). Set the operation mode to FAMP and then press RPARAMETER to display the decoder parameters in the OSD. Press 8k / n repeatedly to select the desired decoder parameter and then press 8l / h repeatedly to change the value of the selected parameter. ADVANCED OPERATION English 79 En