Yamaha P-255 Owner's Manual - Page 44

Customizing with Function Parameters F5.4 String resonance depth This parameter can be used to adjust the depth of the string resonance effect applied to certain Voices-specifically, Grand Piano, Ballad Grand, and Bright Grand. • Available settings: 0 to 10 • Default setting: 5 F5.5 Damper-pedal sustain sample depth Using this parameter, you can adjust the depth of sustain samples applied to certain Voices-specifically, Grand Piano, Ballad Grand, and Bright Grand-when the damper pedal is operated. • Available settings: 0 to 10 • Default setting: 5 F5.6 Key-off sample volume This parameter can be used to adjust the volume of the keyoff sound (i.e., a subtle sound produced when the keys are released) for certain Voices-specifically, Grand Piano, Ballad Grand, Bright Grand, Stage E.Piano, Harpsichord, and Clavi. • Available settings: 0 to 10 • Default setting: 5 F5.7 Intro on/off status Using this parameter, you can specify whether or not an intro section should be played first of all whenever you start a rhythm track. • Available settings: ON and OFF • Default setting: ON F5.8 Ending on/off status This parameter can be used to specify whether or not an ending section should be played whenever you stop a rhythm track. • Available settings: ON and OFF • Default setting: ON F6. Volume settings F6.1 Metronome volume Use this parameter to set the volume of the built-in metronome. • Available settings: 1 to 20 • Default setting: 15 Shortcut: You can jump directly to Function parameter F6.1 by pressing the [FUNCTION] button with the [METRONOME] button held down. F6.2 Rhythm playback volume Using this parameter, you can balance the volumes of the rhythm track (page 20) and the sound produced by the keyboard. • Available settings: 1 to 20 • Default setting: 16 F6.3 Audio song playback volume • Available settings: 1 to 20 • Default setting: 16 Shortcut: You can jump directly to Function parameter F6.3 by pressing the [FUNCTION] button while an audio song is playing. The volume of the song can then be set using the [-/NO] and [+/YES] buttons. F6.4 MIDI song playback volume This parameter can be used to balance the volumes of the sound produced by the keyboard and a MIDI song that you are playing along with. • Available settings: 1 to 20 • Default setting: 20 Shortcut: You can jump directly to Function parameter F6.4 by pressing the [FUNCTION] button while a MIDI song is playing. The volume of the song can then be set using the [-/NO] and [+/YES] buttons. F6.5 Speaker on/off status Using this parameter, you can specify whether the digital piano's built-in speakers should also produce sound when external speakers are connected (page 34). • Available settings: ON (As long as headphones are not connected, the speakers will continue to produce sound.) OFF (The speakers will produce no sound.) • Default setting: ON F6.6 AUX OUT volume control This parameter can be used to specify how the volume of audio output via the AUX OUT jack is controlled. When set to "1" (Variable), you will be able to adjust the volume using the [MASTER VOLUME] slider; when set to "2" (Fixed), the slider will have no effect and the volume will be fixed at the level set by Function parameter F6.7. • Available settings: 1 (Variable) and 2 (Fixed) • Default setting: 1 NOTE • When this parameter is set to "2" (Fixed), the headphones volume will also be fixed at the level set by Function parameter F6.7. F6.7 Fixed AUX OUT volume Using this parameter, you can set the volume to be used when Function parameter F6.6 is set to "2" (Fixed). • Available settings: 0 to 20 • Default setting: 15 44 P-255 Owner's Manual