Yamaha RX-V371 Owners Manual - Page 53

SOURCE 1 1 5 TRANSMIT CODE SET SLEEP RECEIVER MI 2 3 4 AV 2 3 4 AUDIO 1 2 V-AUX [ A ] [ B ] DOCK TUNER FM AM PRESET TUNING INFO MEMORY MOVIE ENHANCER SUR. DECODE MUSIC STEREO STRAIGHT BD DVD SETUP SCENE TV CD RADIO OPTION ENTER VOLUME RETURN DISPLAY TOP MENU REC POP-UP MENU MUTE 1 2 3 4 5 6 7 8 9 INPUT MUTE 0 10 TV TV VOL TV CH ENT n Registering remote control codes d for external component operations The following section describes how to register remote control code using an example of the registration of the remote control codes of a Yamaha BD player connected to HDMI2 jack. • Perform each of the following steps within 1 minute. Settings will be automatically stopped if more than 1 minute passes since the last operation. To reset, repeat from step 2. h • Remote control code of an external component cannot be set from the name or model number of a unit. Use "Remote Control Code Search" in the CD-ROM to search the available remote control codes from the category or manufacturer of external components. • If multiple remote control codes exist, first set the first code in the list, if it does not work then try the other codes. l 1 Use "Remote Control Code Search" in the CDROM to search the available remote control m codes from the category or manufacturer of external components. "2064" can be used for a Yamaha BD player. SETUP Controlling other components with the remote control 3 Press dHDMI2 on the remote control to switch the input source to HDMI2. J1 Perform the following steps to register the selected input source here to the remote control code. 4 Enter a remote control code "2064" using lNumeric keys. J2 2 0 6 4 Once the remote control code is registered successfully the remote control will blink twice. 5 To switch between BD player linked to scene selections, press hSCENE and at the same time press dHDMI2 and hold it for approximately 3 seconds. Then you can operate the external components by switching the input source to HDMI2, or selecting HDMI2 in the registered scene. Same steps for operating other external components, press hSCENE and at the same time press the input source key selected in step 3 and hold it for approximately 3 seconds. Registration successful: blinks twice Registration failed: blinks 6 times SOURCE TRANSMIT SLEEP HDMI CODE SET RECEIVER • If the registration fails, repeat the step 2. • In case of an external component with multiple remote control codes, the other remote control codes may be supported. Repeat from step 2 with the other remote control codes. d HDMI2 h SCENE l Numeric keys m TV control keys mA n CODE SET 2 Press nCODE SET on the remote control using a pointed object such as the tip of a ballpoint pen. J 1 : When you want to register a remote control code to the mTV control keys, press mA (mTV control keys) in step 3. J 2 : When you want to register a remote control code to the mTV control keys, enter the TV remote control code in step 4. En 53