Yamaha S08 Owner's Manual - Page 56
>>001StPia, Imprt, Sure?, Card Filer - manual pdf
View all Yamaha S08 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Basics Section Quick Guide 5 Use the [DEC/NO] and [INC/YES] buttons to select the data you wish to import. When selecting "All" here, go to step 8. n When selecting the "All Voice," the data below will be imported. •User Normal Voice 1 to 128 •User Drum Voice 1to 2 6 Press the [ ] button to call up the display for selecting the destination user voice number. >>001StPia Imprt PAGE 6 PART ELEM KEY 7 Use the [DEC/NO] and [INC/YES] buttons to select the destination user voice number. 8 When you press the [ENTER] button, you will be prompted for confirmation. ROCK 0_ 01 Sure? PAGE 6 PART ELEM KEY n The operation will be canceled if you press the [EXIT] button. 9 Press the [INC/YES] button to execute the operation. A "Completed" message appears when the operation has been completed. n The file name should include the extension ".S6V." If you save a file to a Macintosh computer, the extension ".S6V" is not added automatically. Before loading such files to the S08, you'll need to manually add the extension ".S6V" to the file names. Card Filer With the included Card Filer, you can: • Save your S08 data on Memory Card to your computer. • Transmit data from your computer to a Memory Card on the S08. • Delete and rename files on Memory Card of your MIDI instrument using your computer. • Convert Standard MIDI Files on your computer from Format 1 to Format 0 so that they can be played back on the S08. When using the Card Filer, all S08 panel operations or playing of the keyboard is ignored. (The Voice and Multi LEDs go out.) In this case, the message "File Mode" appears. For details about Card Filer, refer to the separate Installation Guide or the on-line manual (PDF) included with the software. n Never attempt to remove/insert the Memory Card when the S08 is communicating with the Card Filer. n The S08 cannot communicate with the Card Filer in the following conditions. To use the Card Filer, exit from these operations or modes. • Sequence Play mode • Card mode • Bulk transmission • When an "Executing" message is displayed, such as during execution of a Job. n Be careful not to disconnect any connected cables when communicating to the Card Filer, otherwise the operation of the S08 may lock up. If this happens, turn the power off and back on again. Reference Appendix 56 Using the Memory Card