Yamaha S08 Owner's Manual - Page 79
Edits related to Scaling Sensitivity, Velocity Sensitivity and Scale
View all Yamaha S08 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Basics Section Quick Guide Reference Appendix Relevant Settings in the Song Data and on Connected MIDI Devices ● When playing Multis using a MIDI sequencer, have the transmit channels for each sequencer track and the receive channels for each Part in the Multi been set correctly? (Page 64) ● Has the computer's "MIDI Echo" or "MIDI Thru" been set appropriately? (Page 15) ● When playing back a song using a MIDI sequencer, have the volume and expression (page 73) parameters been set appropriately? Cable and Connection Problems ● Has the audio equipment been connected correctly? (Page 13) ● Is the MIDI cable intact and connected properly? (Pages 13, 14, 15, 81) The sound is distorted. ● Have the effects been set appropriately? (Pages 46, 58 and 63) ● Has the volume been set too high? (Pages 11 and 12) The sound is too soft. ● Has MIDI volume or MIDI expression (page 73) been set too low? ● Has the filter cutoff frequency been set too low? (Pages 60, 62, 64) The pitch is wrong. ● Has the Master Tune parameter in Utility Mode been set correctly? (Page 66) ● Has the KbdTrans parameter in Controller Mode been set correctly? (Page 67) ● Have the pitch related parameters in PITCH menu been set appropriately? (Page 59) ● Has the Pitch Modulation Depth in the LFO screen (Voice Edit Mode) been set too high? (Page 61) ● For Parts or Voices, has the Note Shift parameter been set to a value other than 0? (Pages 59 and 64) ● Has the Detune parameter for each Part or Voice been set to a value other than 0? (Pages 59 and 64) Sound is choppy and intermittent. ● Has the maximum polyphony been exceeded? (Page 17) Only one note sounds at a time. ● Has the Mono/Poly parameter been set to "mono"? (Pages 58 and 64) No effects are applied. ● Has the V EfBypass (Voice Effect Bypass) been set to off? (Page 67) ● In the case of a Multi, has Var Send in Part Edit been set to off or a value too close to 0? (Page 65) ● Has the effect type been set to something other than "Thru" or "No Effect" ? (Page 63) ● In the case of a Multi, have the Insertion Effect Parts been specified? (Page 65) Edits related to Scaling Sensitivity, Velocity Sensitivity and Scale (of Pan setting parameter) made to the Voice have no effect. ● Has the Sensitivity been set too low? (Page 39) ● Depending on the selected Voice or the settings of related parameters, changes to these parameters may have little or no audible effect. Troubleshooting 79