Zenith DVR313 Operating Guide - Page 31

Operation with DVD and Video CD (Continued) PLAYBACK General Features (Continued) Still Picture and Frame-by-Frame Playback DVD Video VR VCD2.0 VCD1.1 1 Press PAUSE (X) during playback. The recorder will now go into PAUSE mode. 2 You can advance or back up the picture frame-byframe by pressing b / B repeatedly during PAUSE mode. ote The picture frame-by-frame in reverse is not available for Video CD. Search DVD Video VR VCD2.0 VCD1.1 1 Press and hold SKIP/SCAN (. or >) for about two seconds during playback. The recorder will now go into SEARCH mode. 2 Press and hold SKIP/SCAN (. or >) to select the required speed: mX2, mX4, mX8, mX16, mX100 (backward) or MX2, MX4, MX8, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). 3 To exit SEARCH mode, press PLAY (N). Random Karaoke DVD VCD2.0 VCD1.1 1 Press RANDOM during playback or in Stop mode. The unit automatically begins Random Playback and "RANDOM" appears on the display window. 2 To return to normal playback, press RANDOM until "RANDOM" disappears from the display window. ip By pressing SKIP/SCAN > during Random playback, the unit selects another title (track) and resumes Random playback. ote This function only works with DVD Karaoke discs or video CDs without PBC. On a Video CD with PBC, you must set PBC to OFF in the Setup menu to use the Random function. See page 21. Repeat DVD Video VR VCD2.0 VCD1.1 REPEAT CHAPTER DVD Video Discs - Repeat Chapter/Title/Off 1 To repeat the currently playing chapter, press REPEAT. The REPEAT CHAPTER appears on the TV screen. 2 To repeat the title currently playing, press REPEAT a second time. The REPEAT TITLE appears on the TV screen. 3 To exit Repeat mode, press REPEAT a third time. The REPEAT OFF icon appears on the TV screen. Video CDs - Repeat Track/All/Off 1 To repeat the track currently playing, press REPEAT. The REPEAT TRACK icon appears on the TV screen. 2 To repeat the disc currently playing, press REPEAT a second time. The REPEAT ALL icon appears on the TV screen. 3 To exit Repeat mode, press REPEAT a third time. The REPEAT OFF icon appears on the TV screen. ote On a Video CD with PBC, you must set PBC to OFF in the Setup menu to use the Repeat function. See page 21. Repeat A-B DVD Video VR VCD2.0 VCD1.1 REPEAT A -B To repeat a sequence in a title: 1 Press A-B at your chosen starting point. REPEAT A- appears on the TV screen. 2 Press A-B again at your chosen end point. REPEAT A-B appears briefly on the TV screen, and the repeat sequence begins ("REPEAT A-B" also appears in the display window). 3 To cancel the sequence, press A-B repeatedly to select OFF. Time Search DVD Video VR TIME 0:10:30 The Time Search function allows you to start playing at any chosen time on the disc. 1 Press DISPLAY during playback. The on-screen dis- play appears on the TV screen. The Time Search box shows the elapsed playing time of the current disc. 2 Within 20 seconds, use v / V to select the Time Search icon in the on-screen display. The "0:00:00" appears in the Time Search box. 3 Within 20 seconds, use the number buttons to enter the required start time. Enter hours, minutes, and seconds from left to right in the box. You can not enter an invalid time. If you enter the wrong numbers, press b / B to move the under bar (_) to the wrong number. Then enter the correct numbers. 4 Within 20 seconds, press ENTER to confirm the start time. Playback starts from the selected time on the disc. 31