ZyXEL EMG2306 User Guide - Page 124
The SNMP Screen
View all ZyXEL EMG2306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Chapter 18 Remote Management Click Configuration > Management > Remote MGMT > Telnet to display the screen as shown. Figure 68 Configuration > Management > Remote MGMT > Telnet The following table describes the labels in this screen. Table 53 Configuration > Management > Remote MGMT > Telnet LABEL DESCRIPTION Port You may change the server port number for a service if needed. However you must use the same port number in order to use that service for remote management. Access Status Select the interface(s) through which a computer may access the EMG2306-R10A using this service. Secured Client IP Address Select All to allow all computers to access the EMG2306-R10A. Otherwise, check Selected and specify the IP address of the computer that can access the EMG2306-R10A. Apply Click Apply to save your customized settings and exit this screen. Cancel Click Cancel to exit this screen without saving. 18.6 The SNMP Screen Simple Network Management Protocol is a protocol used for exchanging management information between network devices. Your EMG2306-R10A supports SNMP agent functionality, which allows a manager station to manage and monitor the EMG2306-R10A through the network. The EMG2306- 124 EMG2306-R10A User's Guide