ZyXEL EMG2306 User Guide - Page 149
EMG2306-R10A Access and Login
View all ZyXEL EMG2306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
21.3 EMG2306-R10A Access and Login Chapter 21 Troubleshooting I don't know the IP address of my EMG2306-R10A. 1 The default IP address is 192.168.1.1. 2 If you changed the IP address and have forgotten it, you might get the IP address of the EMG2306R10A by looking up the IP address of the default gateway for your computer. To do this in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default Gateway might be the IP address of the EMG2306-R10A (it depends on the network), so enter this IP address in your Internet browser.Set your device to Router Mode, login (see the Quick Start Guide for instructions) and go to the Device Information table in the Status screen. Your EMG2306-R10A's IP address is available in the Device Information table. • If the DHCP setting under LAN information is None, your device has a fixed IP address. • If the DHCP setting under LAN information is Client, then your device receives an IP address from a DHCP server on the network. 3 If your EMG2306-R10A is a DHCP client, you can find your IP address from the DHCP server. This information is only available from the DHCP server which allocates IP addresses on your network. Find this information directly from the DHCP server or contact your system administrator for more information. 4 Reset your EMG2306-R10A to change all settings back to their default. This means your current settings are lost. See Section 21.5 on page 152 in the Troubleshooting for information on resetting your EMG2306-R10A. I forgot the username and password. 1 The default username is admin and password is 1234. 2 If this does not work, you have to reset the device to its factory defaults. See Section 21.5 on page 152. I cannot see or access the Login screen in the Web Configurator. 1 Make sure you are using the correct IP address. • The default IP address is 192.168.1.1. • If you changed the IP address (Section 10.4 on page 91), use the new IP address. • If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I don't know the IP address of my EMG2306-R10A. EMG2306-R10A User's Guide 149