ZyXEL EMG2306 User Guide - Page 65
Table 17, Label, Description
View all ZyXEL EMG2306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 8 WAN Table 17 Internet Connection: PPP over Ethernet Encapsulation (continued) LABEL DESCRIPTION PPTP Information PPTP Username Type the username given to you by your ISP. PPTP Password Type the password associated with the user name above. MTU Size Enter the Maximum Transmission Unit (MTU) or the largest packet size per frame that your EMG2306-R10A can receive and process. PPTP Auto Connect Select this check box to enable PPTP Auto Connect. Idle Timeout (second) This value specifies the time in minutes that elapses before the router automatically disconnects from the PPPoE server. PPTP Configuration PPTP Server IP Address Type the IP address of the PPTP server. IP Address Obtain an IP Address Automatically Select this option If your ISP did not assign you a fixed IP address. This is the default selection. Static IP Address Select this option If the ISP assigned a fixed IP address. IP Address Enter your WAN IP address in this field if you selected Use Fixed IP Address. Subnet Mask Your EMG2306-R10A will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the EMG2306-R10A. Gateway IP address Enter a Gateway IP Address (if your ISP gave you one) in this field. WAN IP Address Assignment Get automatically from ISP Select this option If your ISP did not assign you a fixed IP address. This is the default selection. Use Fixed IP Address Select this option If the ISP assigned a fixed IP address. My WAN IP Address Enter your WAN IP address in this field if you selected Use Fixed IP Address. DNS Server First DNS Server Second DNS Server Select From ISP if your ISP dynamically assigns DNS server information (and the EMG2306-R10A's WAN IP address). The field to the right displays the (read-only) DNS server IP address that the ISP assigns. Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. If you chose User-Defined, but leave the IP address set to 0.0.0.0, User-Defined changes to None after you click Apply. If you set a second choice to User-Defined, and enter the same IP address, the second User-Defined changes to None after you click Apply. WAN MAC Address WAN MAC Address Factory default Clone the computer's MAC address - IP Address Select None if you do not want to configure DNS servers. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. The MAC address section allows users to configure the WAN port's MAC address by using the EMG2306-R10A's MAC address, copying the MAC address from a computer on your LAN or manually entering a MAC address. Select Factory default to use the factory assigned default MAC Address. Select Clone the computer's MAC address - IP Address and enter the IP address of the computer on the LAN whose MAC you are cloning. EMG2306-R10A User's Guide 65