ZyXEL EMG2306 User Guide - Page 127
The TR069 Screen
View all ZyXEL EMG2306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Chapter 18 Remote Management Table 54 Configuration > Management > Remote MGMT > SNMP (continued) LABEL DESCRIPTION Trap Community Type the trap community, which is the password sent with each trap to the SNMP manager. The default is public and allows all requests. Apply Click Apply to save your customized settings and exit this screen. Reset Click Reset to begin configuring this screen afresh. 18.7 The TR069 Screen TR-069 defines how Customer Premise Equipment (CPE), for example your ZyXEL Device, can be managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending Remote Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible Markup Language (XML) format over HTTP or HTTPS. An administrator can use an ACS to remotely set up the EMG2306-R10A, modify settings, perform firmware upgrades as well as monitor and diagnose the EMG2306-R10A. You have to enable the device to be managed by the ACS and specify the ACS IP address or domain name and username and password. Click Configuration > Management > Remote MGMT > TR069 to display the screen as shown. Use this screen to configure your EMG2306-R10A to be managed by an ACS. Figure 71 Configuration > Management > Remote MGMT > TR069 The following table describes the labels in this screen. Table 55 Configuration > Management > Remote MGMT > TR069 LABEL DESCRIPTION Inform Select Enable for the EMG2306-R10A to send periodic inform via TR-069 on the WAN. Otherwise, select Disable. Inform Interval Enter the time interval (in seconds) at which the EMG2306-R10A sends information to the auto-configuration server. ACS URL Enter the URL or IP address of the auto-configuration server. ACS Username Enter the TR-069 user name for authentication with the auto-configuration server. EMG2306-R10A User's Guide 127